Our Services
High Pressure Truck Cleaning in Melbourne
For trucks that a normal wash won't touch: caked mud, clay, grease, concrete slurry and months of road film.
Some trucks come off site looking like they've been driven through a quarry, because they have. High-pressure cleaning is how we get them back to looking like trucks again.
We set the pressure, nozzle and chemical to suit the job. The aim is to get the grime off without stripping decals, forcing water past seals or damaging the paint. More pressure isn't always better, and we've seen what happens when it's done badly.
- Chassis, underbody and wheel arch cleaning
- Tippers, aggis, bins and bulk tankers
- Plant and machinery coming off site work
- Clean-ups before servicing, inspection or sale
When an ordinary wash isn't enough
If your truck works on construction sites, quarries, farms or landfill, you'll know the mud doesn't come off with a quick rinse. It packs into the chassis rails and wheel arches and hardens. Leave it long enough and it holds moisture against the steel and adds weight you're paying to carry around.
We see it most on tippers, aggis, floats and bin trucks, but any truck that's been off the bitumen for a while can need it. Tell us what the truck has been carting and where the build-up is worst, and we'll know what we're dealing with before it rolls in.
Chassis and underbody cleaning
The underbody is where most of the muck ends up and where most washes skip. We go through the chassis rails, cross members, wheel arches and around the suspension to get the caked dirt out.
We offer underbody washes for prime movers and tippers, plus a dedicated aggi underbody wash with concrete removal for agitators. A clean underbody also makes life easier for your mechanic at the next service, because they can actually see what they're looking at.
The right method for the surface
Paint, decals, alloy, rubber seals and electrical connections all need different treatment. We adjust as we go. Wide fans and lower pressure around signage and seals, more focused work on the chassis, and degreasers where oil and diesel have built up.
If the paint is already damaged or the decals are lifting, tell us first. A wash can show up problems that dirt was hiding, and it can't fix paint that's already gone. If the problem is a dull finish rather than dirt, polishing is the better job.
Pricing for heavy cleaning
Underbody washes are listed on our pricing page: $450 for a prime mover, $650 for a tipper and $1,200 for an aggi with concrete removal, all including GST. Very dirty trucks or ones that need a hot wash can cost extra, depending on what we find.
For plant, machinery or a big clean-up job, give us a call on 1300 010 911 or send some photos through the contact form. That's the fastest way to get a sensible quote.
High Pressure Truck Cleaning in Melbourne FAQs
Is high-pressure cleaning part of a Standard Wash?
Every Standard Wash is a high-pressure exterior wash. A proper underbody clean, heavy degreasing or concrete removal is extra work, so add the underbody option or tell us what you need when you book.
Can you get concrete off an agitator?
Yes. We have a dedicated aggi underbody wash with concrete removal. How much comes off depends on how long the concrete has been there and how thick it is, so send us a photo if you're unsure.
Will pressure washing damage my decals or paint?
Not when it's done properly. We adjust the pressure and distance for paint, decals and seals. If anything is already peeling, cracked or repaired, point it out first so we can work around it.
Can I add an underbody wash to my booking?
Yes. When you pick your vehicle, the underbody options that suit it show up as extras. If yours isn't listed, give us a call.
Do you pressure clean forklifts and plant?
We do. Equipment like forklifts, yard trucks, container handlers and rail shunters is quoted separately. Have a look at our equipment washing page or call us.
How often should a tipper get an underbody clean?
It depends on the work. Trucks on muddy sites every day may need it every few weeks, while others only need it before a service or inspection. If you can see build-up in the chassis rails, it's probably time.
